Posts Tagged ‘Watch Design Submission’

(English) Vertical LED watch with retro-futuristic style.

July 11th, 2014
9

(English) Design submitted by Matt from Canada.

Matt says: I wanted to do a watch with 2 vertical scales & give it a futuristic look.

Read the rest of this entry »

(English) Conception watch mimics the biological process

July 10th, 2014
Conception-Steel-(706x469)

(English) Design submitted by Andrew from the UK.

Andrew says: The biological / sexual reproduction processes sometime refer to as the Biological clock. I thought what would happen if i based a wrist watch on Male sperm cells fertilising a female ovum / egg. This was the idea behind the Conception design constructed in either IP, White Acetate or Steel. Using one of the following display types /  screen: LCD Touch, LED or E-ink / E-paper.

Read the rest of this entry »

(English) Swirl II re-invents the analogue watch

July 9th, 2014
Swirl II 01

(English) Design submitted by Peter from the UK.

Peter says: I was making a working clock of my original SWIRL watch concept as a little project and realised that the concept could be made easier to read by dividing the time telling into two or three displays rather than the single one on the original version, SWIRL II was born.

Read the rest of this entry »

(English) Discreet & minimal watch with natural materials

July 8th, 2014
watch-concept-1

(English) Design submitted by Jacques from The Netherlands.

Jacques says: In a quest for a minimalistic watch I excluded all time reading functionality from the front of the watch and placed it on the side.

It’s actually just a very minimalistic watch on where the time can be read on the side. The dot light represents the hour hand and the ring light the minute hand. The time can be read rather easy but this of course also depends on the hour of the day.

The time reading functionality on the side leaving the front blank, creates a surprising effect, compared to the many watches that have frontal displays with numerous clocks and pointers etc.

Read the rest of this entry »

(English) ITO•E watch draws the time with a continuous line. (update)

July 7th, 2014
sam-jerichow ITO-E 01

(English) Design submitted by Sam from Germany.

Sam says: Since my first ITO design (my second blog entry) I thought about alternatives, especially when it comes to feasibility.

Adapted to what’s possible today, the ITO•E uses a color filmed segmented epaper display embedded in a structured silicone unibody.

Read the rest of this entry »

(English) Time-Card is your futuristic pocket watch.

July 4th, 2014
Time Card 2

(English) Design submitted by Peter from the UK.

Peter says: Being a fan of watches its hard to believe that there are people out there that dont like them.

Some of these people are also not keen on mobile phones let alone having to look at their phones to tell the time. So it seems there is a niche for a time telling device that is neither a phone or watch but is compact to be carried on one person.

Most people carrier a wallet or purse as debit cards and credit cards are a necessary evil of modern living so I decided to come up with a credit card sized clock that is compact enough to fit into a wallet or pocket or could be worn on ones person. The creativly named “Time-Card” was born.

Read the rest of this entry »

(English) Brkn watch comes with pre-shattered screen to save you the bother of dropping it! (update)

July 3rd, 2014
Brkn-2

(English) Design submitted by Justin from the UK.

Justin says: This watch is taken from my Smart-Watch design submitted a little while ago.

Part of that design was of a time-telling mode called “Shattered”…this seemed to be something that people liked the look of…so here it is…Brkn.

Read the rest of this entry »

(English) Switch watch activated by brute force!

July 2nd, 2014
1-Asymmetrical

(English) Design submitted by Patrick from France.

Patrick says: When I had presented my “Kuranku-Watch”, comments are deferred mainly on brittleness of crank (even if it activates only LEDs), thus for the “Switch-Watch”, the handle is much more “muscular”.

Read the rest of this entry »

(English) Quad-Warp : A twisted digital watch

July 1st, 2014
Quad-Warp 01

(English) Design submitted by Peter from the UK.

Peter says: I was looking back at some of my older concepts, namely “Digicoil” and “Digital Warp“.

I have a real fondness for the digit style I used on those two concepts but neither design seemed to push the buttons of the blog voters for some reason. I noticed that the digit examples I used on “Digital Warp” for explanation purposes were actually quite nice in their own right. So I decided to give them one last outing “Quad-Warp” was born.

Read the rest of this entry »

(English) Ammonite watch inspired by prehistoric fossil. (update)

June 30th, 2014
Ammonite-Ace-(706x487)

(English) Design submitted by Andrew from the UK.

Andrew says: This following LED Analogue / Binary  concept is inspired by the fossilized shell of a prehistoric creature know as a Ammonite. This concept is a 12-11-4: Incremental LED Display. 12: Hours / Months, 11: Five Minutes / Days groups &4: Single Minutes / Days . This wristwatch is constructed in three material: White Acetate, IP Black or Stainless Steel with various LED colors: See Digrams

Read the rest of this entry »

(English) The watch Phenomenon using cubist time.

June 27th, 2014
sam-jerichow-phenomenon-00

(English) Design submitted by Sam from Germany.

Sam says: In search for a minimalistic analog watch idea I took inspiration from older concepts of mine and combined them for Phenomenon.

Read the rest of this entry »

(English) Saturn II : Planetary analogue watch

June 26th, 2014
Saturn II 07

(English) Design submitted by Peter from the UK.

Peter says: This is Saturn II, a re-design of my original Saturn concept. Saturn was one of my first concepts submitted to the blog. It never made it onto the blog presumably due to being a little adventurous from a technical perspective.

This version is a lot simpler than the original but still retains the original’s feel.

Read the rest of this entry »

(English) STARS watch galactic view tells the time

June 25th, 2014
Nev-STARS-00

(English) Design submitted by Nev from the UK.

Nev says: My fascination with images of distant stars and galaxies has meant I have always wanted a watch containing a starfield with star flares showing the time, so here’s ‘STARS’.

Read the rest of this entry »

(English) CMK-2 circuit watch wraps LEDs around your wrist.

June 24th, 2014
Circuit-Mk-II-Red

(English) Design submitted by Justin from the UK.

Justin says: I was browsing though my previous submissions and saw my Circuit design. I felt the desire to change it up a little and add a little spice to it. Also I wanted to give it a more defined “circuitry” feel.

So here it is…Circuit MK-2…or CMK-2.

Read the rest of this entry »

(English) Trinary watch combines LED, LCD & different time methods for ultra customisation.

June 23rd, 2014
Trinary 01

(English) Design submitted by Peter from the UK.

Peter says: I seem to have developed a bit of a fondness for the 12/5/9 time telling method, which for me always suggest that the display should be split into three areas/segments (seems intuitive to do so)

I originally had an image in my head that was kind of performance car exhaust esc (think Pagani Zonda) but as I drew it up I realised that it resembled the warning sign for radiation.

Read the rest of this entry »