An asymmetrical concept design with a curved, brushed metal case, black screen and orange interface. The time is simply displayed with hours on the left, the space in the square indicating the current hour, and minutes in digits on the right. Instant time, futuristic design. Read the rest of this entry »
Archive for the ‘Watch Designs’ Category
A concept design with a strong, rugged stainless steel case connected with a timing interface that shows hours, groups of 5 minutes and single minutes 1-4 in three distinct circles. Hours in the upper circle and 5 minute intervals in the bottom left circle are shown at the same points as hours and minutes on a clock face so the approximate time can be read at a glance. Four single minutes are shown in the bottom right circle.
A concept design with robotic looks and a sleek smoked black lens. Green and blue lines present the time in circular shapes that show hours, minutes and seconds in a very simple to read manner, for precise and speedy timing. Hours and groups of 5 minutes are basically in the same positions as hours on a clock face in the upper and lower circles. Single minutes and seconds are shown within the large circles. Read the rest of this entry »
A smart, slimline, stainless steel design that uses LEDs to show the time in a web-like graphic that emanates from the center of the screen to the edges. Each red line from the center to the edge shows an hour in the same position as hours on a regular clock face. Groups of 5 minutes are shown with blue dots, positioned at 5 minute points like on a clock and single minutes 1-4 are shown with four yellow dots. Read the rest of this entry »
A sleek stainless steel concept that will wrap around your wrist like a futuristic bracelet. Grooves in the face continue into the strap and the time is presented with LEDs that illuminate in lines between the grooves; hours 1-12, 5 minutes groups and single minutes.
A concept LED time piece with integrated USB flash memory for data storage. Just take the watch off and connect to the USB key on the end of the strap to the USB port on your computer to upload or download your data. Perfect for keeping your data in a secure place.
The watch has a rubber wrist band and stainless steel case and the interface features rings of LEDs to display the time; hours on the outside, groups of five minutes in the upper circle, four single minutes in the lower circle. The remaining ring indicates the used/remaining storage capacity on the flash memory. The design is also rechargeable via USB. Read the rest of this entry »
At last, a concept design that is extremely simple to read. Hours, groups of 10 minutes and single minutes are shown in three sections; each line indicating an hour, a group of 10 minutes or a single minute. The date is shown in the same way. Within this simple display, the time is also shown in binary – great for those who like a challenge.
A USB rechargeable design that uses a combination of materials to create the case and strap; stainless steel merges into rubber and the e-paper display is embedded within. Read the rest of this entry »
A concept wrist watch that uses a laser light to display the time. With a touch of the button on the side, a beam of light is sent out of the front of the watch through a small window and the laser within reflects the time onto a surface where the watch is pointed.
The time display appears like a target: hours in the outer ring, groups of five minutes on the second ring and single minutes on the inner most ring. The blank face and dark stainless steel case create a mysterious look. Read the rest of this entry »
An e-paper design with a linear time display; the progression of hours and minutes are shown by markers moving down the line and around the side of your wrist, the points on the scale indicating units of time.
The date is shown in a similar way on the left side of the display and this concept will also notify you of messages, emails and calls to your cell phone via Bluetooth to the e-paper interface as well as with a vibration alert.
This design would be USB rechargeable with a leather wrist band. Read the rest of this entry »
A concept wrist watch that uses an OEL panel to display the time. With a lenticular lens above the interface, the illusion of depth is created, resulting in a unique 3D effect.
The time is displayed simply in digits on the 3D cube beneath the lens – an unusual visual way to show time. No 3D glasses required! Read the rest of this entry »
An e-paper design that shows the time in two different ways in one watch; digitally and with lines.
The wrist band is made of a thin sheet of stainless steel that wraps around your wrist like a bracelet, the e-paper is positioned beneath this band to form the time and information display.
The watch vibrates to give message, mail and call notifications from your cell phone and these will appear on the screen via Bluetooth wireless technology. With this design, the buttons are positioned at the top of the band. Read the rest of this entry »
Like split layers of a clock face, this concept shows hours and groups of five minutes in two separate dials. Hours on the left and groups of five minutes on the right; great for reading the approximate time at a glance. Four single minutes are indicated by the circles inside the dials and the shapes above where the dials meet.
The long button on the right is to light up the display and the port on the left is for USB charging. The case shape and strap design maintain a simple appearance. Read the rest of this entry »
The skeletal frame of this concept creates a completely unique appearance. In the spaces either side of the face, where the frame is split, the operation buttons and USB charging port are located.
Bright blue LED segments make up the interface which displays the time; hours in the outer ring and groups of five minutes in the inner most ring, in the same position as numbers on a clock face. Single minutes 1-4 are located in between.
The screen is covered with mineral crystal glass and the stainless steel strap is narrow to fit in with the theme. Read the rest of this entry »
The positions of numbers and lines on the face of this concept creates a pattern much like a constellation of stars. Red LEDs light up to display the time, which can be read easily due to the numbers within the lenses.
Simply connect the dots to read the time; e.g. 4+50+3 = 4:53. The display is presented in a simple round case and as an added touch, each lens is convex and raised above the surface of the face. Read the rest of this entry »
A twin-screen design with blue digital tube LEDs beneath smoked black lenses in a stainless steel case. The wide face displays hours and minutes in two separate windows.
Hour and five minute blocks are located in the same positions as numbers on a clock face so the time can be read easily. The operation button and charging port at the sides of the case add to the robotic character appearance. Read the rest of this entry »